FREE SHIPPING IN ALL 50 STATES (excluding freight purchases)
Cart 0
Glacier Tek Children’s Cool Vest - White, Includes GlacierPack Set

Glacier Tek Children’s Cool Vest - White, Includes GlacierPack Set

$ 172.00

Features

The Glacier Tek Children's Cooling Vest is available in eight different colors (blue, green, pink, red, white, yellow, orange and tan) and features side elastic straps and over-the-shoulder adjustability to fit a wide range of body sizes, ranging from approximately 30 to 90 pounds. The vest is made from either a durable polycotton or nylon washable fabric. It can be washed by hand and line dried. Cooling packs can be washed with soap and water in the sink.

  • Made specifically for children or smaller adults (up to approximately 90 pounds)
  • Weighs less than three pounds with GlacierPacks
  • Dry and clean, not soggy and soaking wet like evaporative products
  • Maintains a dry, comfortable 59°F / 15°C for up to 2.5 hours in 100°F / 38°C heat
  • Self-contained, portable and unpowered - no cumbersome hoses, tubes or tethers
  • Made in the USA

Applications

Children, Sports

SPECIAL SHIPPING RESTRICTIONS
Indonesia Philippines Singapore
We do not ship to the following countries (except to verified U.S. concerns therein, subject to verification by the resident U.S. Embassy in that country. NOTE: We ship to the U.S. military anywhere in the world and give it highest priority.)
Balkans Iran Somalia
Belarus Iraq South Sudan
Burma Ivory Coast Sudan
Cuba Lebanon Syria
China Liberia Taiwan
Congo Libya Ukraine
Crimea North Korea Venezuela
Central African Republic Pakistan Yemen
India Russia Zimbabwe

 

About our cooling technology

Glacier Tek cooling vests are powered by PureTemp, a nontoxic, biodegradable phase change material that freezes at a cool, but not cold, 59°F. The cooling technology is completely harmless to people, animals and the environment.

Weighing about 4 pounds, the Glacier Tek cool vests are comfortable and easy to use. They can recharge in about 20 minutes in ice and water, one hour in a freezer and a few hours to overnight in the refrigerator. The packs will last up to 2½ hours in a 100°F environment.

Cooling technologies offered by competitors fall short in a variety of ways:

CHEMICAL-BASED PCMs

Some PCM products use old-style petroleum byproducts, like hexadecane, which are hazardous chemicals.

  • Petroleum-based PCMs are not completely biodegradable and may take years or decades to decompose, leading to long-term effects on the environment
  • Some paraffins, and other petroleum-based products, are carcinogenic and may be toxic to plants and wildlife
  • Paraffins are derived from petroleum, which causes the price of the PCM to fluctuate based on the cost of crude oil
  • Paraffins can contribute to an increase in carbon emissions
  • Paraffins must be handled and disposed of according to hazardous material regulations in all 50 states and in most foreign countries

ICE AND GEL

Ice and gel pack PCMs are bulky, have a shorter cooling time and have the strong potential to sweat.

  • A fully loaded vest with packs typically weighs between 9 and 11 pounds
  • Since ice packs solidify at 32°F / 0°C, they can cause tissue damage with prolonged exposure to skin
  • Stays cool for only a short time
  • Will melt and produce condensation - leaving the wearer uncomfortably wet

EVAPORATIVE

Evaporative PCM technology relies on soaking the vest in water before putting it on, which can make the wearer uncomfortable after time.

  • Will only work in warm, dry air
  • Will not work in high humidity climates, which is severely limiting
  • Can cause skin irritation, bacterial growth, mold and foul odor
  • Will not work under any protective outerwear

Cooling the body keeps the mind focused.

Working in hot and confined environments can create heat stress - a dangerous condition that can cause slowed reaction times, reduced energy, and difficulties with attention. This results in reduced safety, decreased efficiency and an overall loss of productivity.

To help prevent heat stress, many personal cooling technologies have been developed for the workplace. These can range from spot coolers to fluid-chilled systems to passive ice vests.

Which is right for you? What are the pros and cons of each type of technology? In this guide, we'll review each of today's personal cooling technologies and give you an overview of the features and benefits of each. You'll be able to compare the technologies and choose the one that's best for your application.

To set the stage, we'll first give you a brief overview of how the body cools. You'll also learn how the lack of proper cooling can affect the body, as well as how to monitor your workplace for heat stress conditions.

We've included an evaluation survey to help you assess your workplace and your needs. Use it together with the comparative technology information to help you determine the best personal cooling technology for your application.

Understand how the body cools.

About 90 percent of the body's heat is produced in the torso area by the major organs and muscle groups. The amount of heat generated is increased as the body works harder. In order to maintain a constant core temperature, the body must either give up or retain this heat as necessary. How this is accomplished depends greatly on the ambient temperature and humidity around you.

Convective body cooling.

Under normal conditions (60° to 80° F ambient temperature), the circulatory system carries core heat toward the skin's surface. Since heat always travels from hot to cold, rather than from cold to hot, the body heat is carried away as the cooler outside air passes over the skin. This process is known as convective cooling, since the heat is removed by the movement of air.

Evaporative body cooling.

As the temperature outside begins to rise, the difference between normal skin temperature (90° F) and the ambient temperature narrows. This difference is known as the delta T. As the ambient temperature rises above 80° F, the delta T is not great enough to allow the body's internal heat to flow away from the body by convection.

Instead, the body reacts by cooling itself through a process known as evaporative cooling. When water fluid is exposed to warm, dry air, it will evaporate into water vapor. This change of state is called a phase change and it produces a tremendous cooling effect. The body creates this phase change by secreting perspiration from our sweat glands to the surface of the skin.

When the air surrounding the skin is warm and dry, this is an extremely efficient process. But as the humidity rises, perspiration can no longer evaporate to water vapor, as the air is already saturated. This is a dangerous condition, since the body has no other natural mechanism to give up heat.

Vasoconstriction and the brain.

When the outside temperature drops below 60° F, the body needs to reverse the process and retain its internally generated heat. This is accomplished by a process called vasoconstriction. Vasoconstriction is the restriction of blood flow to the skin surface by contraction of blood vessels. Since the body's organs must always have a flow of blood, vasoconstriction is applied only to those vessels carrying heat to the skin's surface.

When the brain is fooled into thinking the temperature is cool - when ice is applied to the body, for example - vasoconstriction occurs in an effort to prevent loss of heat, even though the core temperature is actually rising. This can lead to dizziness and fainting. More dangerous is the fact that the cool skin temperature physiologically feels comfortable, so you may actually work harder, creating an even faster rise in core body temperature and the risk of cardiac arrest.

What Does "GREEN" Mean for the Chemicals in Our Products?
Today, the most encompassing definition of a "GREEN" chemical has been developed by the US Government.  RPCM® is the only phase change material on the market today that meets every single criteria, and the only one that carries the USDA's official BioPreferred Certification.

It states that a "GREEN" chemical:

  • Must NOT contain *'carcinogens', **'mutagens', or ***'teratogens'.
    Must NOT contain any ozone depleting compounds, greenhouse gases or substances that contribute to smog
  • Must have a chemical P.H. between 4 and 9.
  • Must NOT be corrosive or irritating to the skin or eyes.
  • V.O.C. levels must meet or be less volatile than the California Code of Regulations maximum allowable V.O.C. level for various categories.
  • Must NOT be delivered in aerosol cans with a petrochemical propellant.
  • Must NOT contain petrochemical-derived fragrances.
  • Must NOT contain dyes.
  • Must be dispensed through automatic systems in order to reduce employee contact with chemicals.
  • Must NOT contain any chemicals under Section 313 of the Emergency Planning and Community Right-to-Know Act.
  • Must NOT constitute hazardous wastes.
  • Must NOT contain arsenic, lead, cadium, cobalt, chromium, mercury, zinc, nickel and/or selenium.
  • Must NOT contain petroleum distillates.
  • Must NOT be "combustible".
  • Must be "Biodegradable".
  • Must be "Bio-based".
  • Must NOT contain chlorinated solvents.
  • Must NOT contain persistent or bio-accumulative substances.


*carcinogen = cancer-causing agent
**mutagen = any agent, such as ultraviolet light, radioactive element, or chemical ingredient which can induce or increase the frequency of mutation in an organism
***teratogens = (According to "American Heritage"), any agent such as virus, a drug, or radiation, that adversely affects and causes malformations of a developing embryo or fetus ).

The President of the United States has signed Executive Order 13101, mandating the purchase of environmentally preferable products and services. According to E.O. 13101, "environmentally preferable" means "products or services that have a lesser or reduced effect on human health and the environment when compared with competing products or services that serve the same purpose. The Glacier Tek RPCM® Cooling Vest is the only product on the market that meets the requirements of this Executive Order.

 

Your guide to staying safe and comfortable.

No matter how good a product may be, it must be used correctly and responsibly to be effective. Please note that our cool vests and body cooling products are intended only to help fight the potentially adverse affects of extreme temperatures on the body. They have not been designed or tested for medical purposes, and we do not make any medicinal or therapeutic claims.

Customers are instructed to consult their physicians or health-care providers prior to use of any product or engagement in any activity that can conceivably affect one's health or medical condition in any way. Glacier Tek products are not medical devices and Glacier Tek, Inc. and subsidiaries make no claim of efficacy in treating specific symptoms. Glacier Tek specifically disclaims that our products will treat, heal, lessen, manage, cure or prevent disease.

Due care should be used to prevent damage to the product and any cooling pack that becomes damaged or develops a leak should be removed from service immediately. Phase Change Materials have high flash points, but like people they can burn at a high enough temperature. No cooling vests should be exposed to open flame or allowed to come into contact with any ignition source.

If you lend or share your Cool Vest or components of it, please remember to also share the product literature, including warnings and instructions, with the users.


Share this Product


More from this collection